Stainless Steel Wall Mount Enclosures

Saginaw Control and Engineering Stainless Steel Wall Mount Enclosures offer: • Clamp fastened Single Door Enclosures in 304 Stainless Steel • Clamp fastened Single Door Enclosures in 316 Stainless Steel • Enviroline® Two Door Enclosures in Stainless Steel • Enviroline® Single Door Enclosures for Flange-Mounted Disconnects with SCE Door Hardware in 304 Stainless Steel • Enviroline® Single Door Enclosures for Flange-Mounted Disconnects with SCE Door Hardware in 316 Stainless Steel • Enviroline® Sloping Top Single Door Enclosures for Flange Mounted Disconnects with SCE Door Hardware in Stainless Steel • Clamp fastened Single Door Enclosures for Flange Mounted Disconnects in Stainless Steel

  • Clamp Fastened Single Door Enclosures (304 Stainless Steel)

    VN:F [1.9.22_1171]
    (Click stars to rate)
    Rating: 10.0/10 (1 vote cast)

    Clamp Fastened Single Door Stainless Steel Enclosures (304 Stainless Steel) are designed to house electrical and electronic controls, instruments and components in areas which may be regularly hosed down or are in very wet conditions. Provides protection from dust, dirt, oil and water. For outdoor application a drip shield is recommended. For installation information, consult our Installation Manual at www.
    saginawcontrol.com.

    Construction –
    • 0.075” stainless steel Type 304.
    • No holes or knockouts, continuously welded seams ground smooth.
    • Flange trough collar around all sides of door opening.
    • Oil-resistant door gasket.
    • Collar studs provided for mounting optional sub-panels.
    • Hasp and staple for padlocking.
    • Stainless steel continuous hinge.
    • Print pocket.
    • Ground stud on door.
    • Stainless steel clamps on three sides of door will keep out all liquids and other contaminants.

    Finish –
    #4 brushed finish on all exterior surfaces.
    Optional panels are powder coated white.

    IS5 – Industry Standards –
    NEMA Type 4, 4X 12 & Type 13
    UL Listed Type 4, 4X & 12
    CSA Type 4, 4X & 12
    IEC 60529 IP66

    stainless steel clamp fastened single door enclosures
  • Clamp Fastened Single Door Enclosures (316 Stainless Steel)

    VN:F [1.9.22_1171]
    (Click stars to rate)
    Rating: 10.0/10 (1 vote cast)

    Stainless Steel Clamp Fastened Single Door Enclosures (316 Stainless Steel) are designed to house electrical and electronic controls, instruments and components in areas which may be regularly hosed down or are in very wet conditions. Provides protection from dust, dirt, oil and water. For outdoor application a drip shield is recommended. For installation information, consult our Installation Manual at www.saginawcontrol.com.

    Construction –
    • 0.075” stainless steel Type 316.
    • No holes or knockouts, continuously welded seams ground smooth.
    • Flange trough collar around all sides of door opening.
    • Oil-resistant door gasket.
    • Collar studs provided for mounting optional sub-panels.
    • Hasp and staple for padlocking.
    • Stainless steel continuous hinge.
    • Print pocket.
    • Ground stud on door.
    • Stainless steel clamps on three sides of door will keep out all liquids and other contaminants.

    Finish –
    #4 brushed finish on all exterior surfaces.
    Optional panels are powder coated white.

    IS5 – Industry Standards –
    NEMA Type 4, 4X 12 & Type 13
    UL Listed Type 4, 4X & 12
    CSA Type 4, 4X & 12
    IEC 60529 IP66

    stainless steel clamp fastened single door enclosures
  • Enviroline Series 304 Stainless Steel Single Door Enclosures For Flange Mounted Disconnects

    VN:F [1.9.22_1171]
    (Click stars to rate)
    Rating: 10.0/10 (1 vote cast)

    Enviroline Series 304 Stainless Steel Single Door Enclosures For Flange Mounted Disconnects are designed to house most standard type
    disconnects. For installation information, consult our Installation Manual at www.saginawcontrol.com. For outdoor application a drip shield is recommended.

    Construction –
    • 0.075” stainless steel Type 304.
    • Seams continuously welded and ground smooth.
    • Flange trough collar around all sides of door opening.
    • Oil-resistant gasket.
    • Collar studs provided for mounting optional panels.
    • Holes provided in body for mounting disconnect operating handle and operating mechanism.
    • Stainless Steel concealed hinge.
    • Doors are interchangeable and easily removed by pulling hinge pin.
    • 3-point latching mechanism.
    • Latches are opened or closed with screwdriver (optional tamper-resistant inserts available).
    • Mounting holes in back of enclosure.
    • Mounting hardware, sealing washer and hole plug included.
    • Ground studs on door and body.
    • Black zinc die cast coinproof/padlocking handle.

    Disconnect switch (or circuit breaker) and operating mechanism are not
    furnished with this enclosure.

    Finish –
    #4 brushed finish on all exterior surfaces.
    Optional subpanels are powder coated white.

    IS5 – Industry Standards –
    NEMA Type 4, 4X 12 & Type 13
    UL Listed Type 4, 4X & 12
    CSA Type 4, 4X & 12
    IEC 60529 IP66

    enviroline stainless steel single door disconnect for flange mounted hardware
  • Enviroline Series 316 Stainless Steel Single Door Enclosures For Flange Mounted Disconnects

    VN:F [1.9.22_1171]
    (Click stars to rate)
    Rating: 10.0/10 (1 vote cast)

    Enviroline Series 316 Stainless Steel Single Door Enclosures For Flange Mounted Disconnects are designed to house most standard type disconnects. For installation information, consult our Installation Manual at www.saginawcontrol.com. For outdoor application a drip shield is recommended.

    Construction –
    • 0.075” stainless steel Type 316.
    • Seams continuously welded and ground smooth.
    • Flange trough collar around all sides of door opening.
    • Oil-resistant gasket.
    • Collar studs provided for mounting optional panels.
    • Holes provided in body for mounting disconnect operating handle and operating mechanism.
    • Stainless Steel concealed hinge.
    • Doors are interchangeable and easily removed by pulling hinge pin.
    • 3-point latching mechanism.
    • Latches are opened or closed with screwdriver (optional tamper-resistant inserts available).
    • Mounting holes in back of enclosure.
    • Mounting hardware, sealing washer and hole plug included.
    • Ground studs on door and body.
    • Black zinc die cast coinproof/padlocking handle.

    Disconnect switch (or circuit breaker) and operating mechanism are not
    furnished with this enclosure.

    Finish –
    #4 brushed finish on all exterior surfaces.
    Optional subpanels are powder coated
    white.

    IS5 – Industry Standards –
    NEMA Type 4, 4X 12 & Type 13
    UL Listed Type 4, 4X & 12
    CSA Type 4, 4X & 12
    IEC 60529 IP66

    enviroline stainless steel single door disconnect for flange mounted hardware
  • Enviroline Series Stainless Steel Junction Enclosures (304 and 316 Stainless Steel)

    VN:F [1.9.22_1171]
    (Click stars to rate)
    Rating: 10.0/10 (1 vote cast)

    Saginaw Control and Engineering Enviroline® Series Junction Enclosures (304 and 316 Stainless Steel) are designed to house electrical controls, instruments and components in areas, which may be regularly hosed down or are in very wet or oily conditions. Provides protection from
    dust, dirt, oil, and water. For outdoor application a drip shield is recommended. For installation information, consult our Installation
    Manual at www.saginawcontrol.com.

    Construction –
    • 0.063” stainless steel type 304 & 316.
    • Seams continuously welded and ground smooth.
    • Flange trough collar around all sides of door opening.
    • Oil-resistant gasket.
    • Standoffs provided for mounting optional panels.
    • Removable hinge.
    • Doors open 180 degrees.
    • Black mini 1/4 turn latches.
    • Latches are opened or closed with a screwdriver.
    • Sealing washers and hole plugs included.
    • Ground stud on door & body.
    • Optional mounting feet available.
    • Optional latches available.

    Finish –
    #4 brushed finish on all exterior surfaces.
    Optional panels are powder coated white.

    IS5 – Industry Standards –
    NEMA Type 4, 4X 12 & Type 13
    UL Listed Type 4, 4X & 12
    CSA Type 4, 4X & 12
    IEC 60529 IP66

    enviroline-series-stainless-steel-junction-enclosures
  • Enviroline Series Stainless Steel Junction Trough Enclosures

    VN:F [1.9.22_1171]
    (Click stars to rate)
    Rating: 10.0/10 (1 vote cast)

    Saginaw Control and Engineering Enviroline® Series Stainless Steel Junction Trough Enclosures are designed to house electrical controls,
    instruments and components used in an indoor or outdoor environment to provide a degree of protection for the equipment inside the enclosure against ingress of solid foreign objects (falling dirt); and provide a degree of protection with respect to the harmful effects on the equipment due to the ingress of water (rain, sleet, snow). For installation information, consult our Installation Manual at www.saginawcontrol.com.

    Construction –
    • 0.063 stainless steel Type 304.
    • Seams continuously welded and ground smooth.
    • Flange trough collar around all sides of door opening
    • Oil-resistant gasket
    • Standoffs provided for mounting optional panels
    • Removable hinges.
    • Doors open 180 degrees
    • Black mini quarter turn latches
    • Latches are opened or closed with a screwdriver
    • Sealing washers and hole plugs included
    • Ground stud on door and body
    • Mounting holes in back for optional mounting feet included.
    • Padlocking or keylocking latches, and tamper-resistant hardware is available.

    Finish –
    #4 brushed finish on all exterior surfaces.
    Optional panels are powder coated white.

    IS5 – Industry Standards –
    NEMA Type 4, 4X 12 & Type 13
    UL Listed Type 4, 4X & 12
    CSA Type 4, 4X & 12
    IEC 60529 IP66

    enviroline series stainless steel junction trough enclosures
  • Enviroline Series Stainless Steel Single-Door Enclosures (304 Stainless Steel)

    VN:F [1.9.22_1171]
    (Click stars to rate)
    Rating: 10.0/10 (1 vote cast)

    Saginaw Control and Engineering Enviroline® Series Stainless Steel Single-Door Enclosures (304 Stainless Steel) are designed to house electrical and electronic controls, instruments and components in
    areas which may be regularly hosed down or are in very wet conditions. Provides protection from dust, dirt, oil, and water. For outdoor application a drip shield is recommended. For installation information,
    consult our Installation Manual at www.saginawcontrol.com.

    Construction –
    • 0.075” stainless steel Type 304.
    • Seams continuously welded and ground smooth.
    • Flange trough collar around all sides of door opening.
    • Oil-resistant gasket.
    • Collar studs provided for mounting optional panels.
    • Stainless Steel concealed hinge.
    • Removable and interchangeable doors.
    • Black quarter turn latches.
    • Latches are opened or closed with a screwdriver (optional tamper-resistant inserts are available).
    • Mounting holes in back of enclosure.
    • Mounting hardware, sealing washer and hole plug included.
    • Removable print pocket.
    • Ground studs on door and body.

    Options –
    • Optional mounting feet available.
    • Door hardware available.

    Finish –
    #4 brushed finish on all exterior surfaces.
    Optional panels are powder coated white.

    IS5 – Industry Standards –
    NEMA Type 4, 4X 12 & Type 13
    UL Listed Type 4, 4X & 12
    CSA Type 4, 4X & 12
    IEC 60529 IP66

    enviroline stainless steel single door enclosure
  • Enviroline Series Stainless Steel Single-Door Enclosures (316 Stainless Steel)

    VN:F [1.9.22_1171]
    (Click stars to rate)
    Rating: 10.0/10 (1 vote cast)

    Saginaw Control and Engineering Enviroline Series Stainless Steel Single-Door Enclosures (316 Stainless Steel) are designed to house electrical and electronic controls, instruments and components in areas which may be regularly hosed down or are in very wet conditions. Provides protection from dust, dirt, oil, and water. For outdoor application a drip shield is recommended. For installation information, consult our Installation Manual at www.saginawcontrol.com.

    Construction –
    • 0.075” stainless steel Type 316.
    • Seams continuously welded and ground smooth.
    • Flange trough collar around all sides of door opening.
    • Oil-resistant gasket.
    • Collar studs provided for mounting optional panels.
    • Stainless Steel concealed hinge.
    • Removable and interchangeable doors.
    • Black quarter turn latches.
    • Latches are opened or closed with a screwdriver (optional tamper-resistant inserts are available).
    • Mounting holes in back of enclosure.
    • Mounting hardware, sealing washer and hole plug included.
    • Removable print pocket.
    • Ground studs on door and body.

    Options –
    • Optional mounting feet available.
    • Door hardware available.

    Finish –
    #4 brushed finish on all exterior surfaces.
    Optional panels are powder coated white.

    IS5 – Industry Standards –
    NEMA Type 4, 4X 12 & Type 13
    UL Listed Type 4, 4X & 12
    CSA Type 4, 4X & 12
    IEC 60529 IP66

    enviroline stainless steel single door enclosure
  • Enviroline Series Stainless Steel Single-Door Enclosures With 3 Point Hardware

    VN:F [1.9.22_1171]
    (Click stars to rate)
    Rating: 10.0/10 (1 vote cast)

    Saginaw Control and Engineering Enviroline® Series Stainless Steel Single-Door Enclosures With 3 Point Hardware are designed to house electrical and electronic controls, instrumentation and components in indoor or outdoor locations. For outdoor applications a drip shield is recommended. For installation information, consult our Installation Manual at www.saginawcontrol.com.

    Construction –
    • 0.75” stainless steel Type 304.
    • Seams continuously welded and ground smooth.
    • Flange trough collar around all sides of door opening.
    • Collar studs provided for mounting optional panels.
    • Mounting holes in back of the enclosure for wall mounting.
    • Mounting hardware, sealing washers and hole plugs included.
    • Stainless steel concealed hinges.
    • Removable and interchangeable doors.
    • Black zinc die cast keylocking/padlocking handles.
    • 3-point latching mechanism.
    • Black quarter turn latches.
    • Removable print pocket.
    • Oil and water resistant gasket.
    • Ground stud on door and body.

    Finish –
    #4 brushed finish on all exterior surfaces.
    Optional panels are powder coated white.

    IS5 – Industry Standards –
    NEMA Type 4, 4X 12 & Type 13
    UL Listed Type 4, 4X & 12
    CSA Type 4, 4X & 12
    IEC 60529 IP66

    enviroline series stainless steel single door enclosures with 3 point hardware
  • Enviroline Series Stainless Steel Two Door Enclosures with 3 Point Hardware

    VN:F [1.9.22_1171]
    (Click stars to rate)
    Rating: 10.0/10 (1 vote cast)

    Enviroline Series Stainless Steel Two Door Enclosures with 3 Point Hardware are designed to house electrical and electronic controls, instrumentation and components in indoor locations. For outdoor applications a drip shield is recommended. For installation information, consult our Installation Manual at www.saginawcontrol.com.

    Construction –
    • 0.075” Stainless Steel Type 304.
    • Seams continuously welded and ground smooth.
    • Flange trough collar around all sides of door opening.
    • Collar studs provided for mounting optional panels.
    • Removable centerposts permit easy panel installation.
    • Mounting holes in back of the enclosure for wall mounting.
    • Mounting hardware, sealing washers and hole plugs included.
    • Stainless Steel Concealed hinges.
    • Removable and interchangeable doors.
    • Black key locking padlocking handles.
    • 3-point latching mechanism.
    • Removable print pocket.
    • Oil & water resistant gasket.
    • Ground stud on door and body.

    Options –
    Provisions for mechanical interlock.
    See accessory section to order.

    Finish –
    #4 Brushed finish on all exterior surfaces.
    Optional panels are powder coated white.

    IS5 – Industry Standards –
    NEMA Type 4, 4X 12 & Type 13
    UL Listed Type 4, 4X & 12
    CSA Type 4, 4X & 12
    IEC 60529 IP66

    enviroline stainless steel two door enclosure
  • Enviroline Series Stainless Steel Wall Mount Sloping Top Disconnect Enclosures

    VN:F [1.9.22_1171]
    (Click stars to rate)
    Rating: 10.0/10 (1 vote cast)

    Enviroline Series Stainless Steel Wall Mount Sloping Top Disconnect Enclosures are designed to house most standard type disconnects. For installation information, consult our Installation Manual at www.saginawcontrol.com.

    Construction –
    • 0.075” Stainless Steel Type 304.
    • Seams continuously welded and ground smooth.
    • Flange trough collar around all sides of door opening.
    • 15 Degree Sloping Top.
    • Stainless Steel Concealed hinges.
    • Stainless Steel coinproof/padlocking handle.
    • 3-point latching mechanism.
    • Removable print pocket on main door of disconnect enclosures.
    • Oil & water resistant gasket.
    • Ground stud on door and body.

    Disconnect switch (or circuit breaker) and operating mechanism are not furnished with this enclosure.

    Finish –
    # 4 Brushed finish on all exterior surfaces.
    Optional panels are powder coated white.

    IS5 – Industry Standards –
    NEMA Type 4, 4X 12 & Type 13
    UL Listed Type 4, 4X & 12
    CSA Type 4, 4X & 12
    IEC 60529 IP66

    enviroline stainless steel slope top disconnect enclosure
  • Enviroline Series Stainless Steel Wall Mount Sloping Top Enclosures

    VN:F [1.9.22_1171]
    (Click stars to rate)
    Rating: 10.0/10 (1 vote cast)

    Enviroline Series Stainless Steel Wall Mount Sloping Top Enclosures are designed to house electrical and electronic controls, instrumentation and components in indoor, outdoor and sanitary locations. For installation information, consult our Installation Manual at www.saginawcontrol.com.

    Construction –
    • 0.75” Stainless Steel Type 304.
    • Seams continuously welded and ground smooth.
    • Flange trough collar around all sides of door opening.
    • 15 Degree Sloping Top.
    • Collar studs provided for mounting optional panels.
    • Mounting holes in back of the enclosure for wall mounting.
    • Mounting hardware, sealing washers and hole plugs included.
    • Stainless Steel Concealed hinges.
    • Removable and interchangeable doors.
    • Black quarter turn latches.
    • Latches are opened or closed with a screwdriver (optional tamper resistant latches are available).
    • Removable print pocket.
    • Oil & water resistant gasket.
    • Ground stud on door and body.

    Finish –
    # 4 Brushed finish on all exterior surfaces.
    Optional panels are powder coated white.

    IS5 – Industry Standards –
    NEMA Type 4, 4X 12 & Type 13
    UL Listed Type 4, 4X & 12
    CSA Type 4, 4X & 12
    IEC 60529 IP66

    enviroline stainless steel slope top disconnect enclosure
  • Stainless Steel Clamp Fastened Single Door Enclosures for Flange Mounted Disconnects

    VN:F [1.9.22_1171]
    (Click stars to rate)
    Rating: 10.0/10 (1 vote cast)

    Stainless Steel Clamp Fastened Single Door Enclosures for Flange Mounted Disconnects are designed to house most standard type
    disconnects. For installation information, consult our Installation Manual at www.saginawcontrol.com. For outdoor application a drip shield is recommended.

    Construction –
    • 0.075” stainless steel Type 304 & 316.
    • Seams continuously welded and ground smooth.
    • Stainless steel continuous hinge.
    • Flange trough collar around all sides of door opening.
    • Interior print pocket.
    • Oil-resistant door gasket.
    • Ground studs on door and body.
    • Disconnect cutout provided on flange.
    • Stainless steel clamps on three sides.
    • No door stiffeners required.
    • Collar studs provided for mounting optional panels.

    Disconnect switch (or circuit breaker) and operating mechanism are not
    furnished with this enclosure.

    Finish –
    #4 brushed finish on all exterior surfaces.
    Optional subpanels are powder coated white.

    IS5 – Industry Standards –
    NEMA Type 4, 4X 12 & Type 13
    UL Listed Type 4, 4X & 12
    CSA Type 4, 4X & 12
    IEC 60529 IP66

    stainless steel clamp fastened single door disconnect enclosure
  • Stainless Steel Continuous Hinge Junction Enclosures (304 and 316 Stainless Steel)

    VN:F [1.9.22_1171]
    (Click stars to rate)
    Rating: 10.0/10 (1 vote cast)

    Saginaw Control and Engineering Stainless Steel Continuous Hinge Junction Enclosures are available in 304 and 316 Stainless Steel. They are designed for use as electrical junction boxes, terminal wiring boxes, instrument housings, and electrical control enclosures. For use in wet and hosed down areas and in corrosive atmospheres. For installation information, consult our Installation Manual at www.saginawcontrol.com.

    Construction –
    • 0.075” stainless steel Type 304 & 316
    • Seams continuously welded and ground smooth.
    • Oil-resistant door gasket.
    • Ground stud on door.
    • Stainless steel continuous hinge.
    • Standoffs provided for mounting optional panels.

    Finish –
    #4 brushed finish on all exterior surfaces.
    Optional panels are powder coated white.

    IS5 – Industry Standards –
    NEMA Type 4, 4X 12 & Type 13
    UL Listed Type 4, 4X & 12
    CSA Type 4, 4X & 12
    IEC 60529 IP66

    stainless steel continuous hinge junction enclosure
  • Stainless Steel Pushbutton Enclosures

    VN:F [1.9.22_1171]
    (Click stars to rate)
    Rating: 10.0/10 (1 vote cast)

    Saginaw Control and Engineering Stainless Steel Wall Mount Enclosures are designed to house standard pushbuttons, switches and pilot lights in wet and hosed down areas and in corrosive atmospheres. For installation information, consult our Installation Manual at www.
    saginawcontrol.com.

    Construction –
    • 0.063” stainless steel Type 304
    • Seams continuously welded and ground smooth.
    • Captivated cover screws thread into sealed wells.
    • 4-way pushbutton holes accept all brands of oil-tight pushbuttons, switches and pilot lights. Hole diameter is 1.20” (30.5 mm).
    • Immediate removal of cover is permitted.
    • Oil-resistant door gasket.

    Options –
    Can be special ordered in Type 316 stainless steel.

    Finish –
    #4 brushed finish on all exterior surfaces.

    IS5 – Industry Standards –
    NEMA Type 4, 4X 12 & Type 13
    UL Listed Type 4, 4X & 12
    CSA Type 4, 4X & 12
    IEC 60529 IP66

    stainless steel pushbutton enclosure
    ↑ Top of Page
    ×
    Quick Quote
    • This field is for validation purposes and should be left unchanged.
    ×
    My Favorites

    < ?php mfp_the_link("add_link=Add item to favorites”);
    ?>
    < ?php mfp_display("Your Favorites”);
    ?>

    ×
    ×