Fiberglass Enclosures

Saginaw Control and Engineering Fiberglass Enclosures. Fiberglass Pushbutton Enclosures, Fiberglass Junction Enclosures, Fiberglass Clamp Cover Enclosures.

  • Fiberglass Screw Cover Junction Enclosures

    VN:F [1.9.22_1171]
    (Click stars to rate)
    Rating: 9.0/10 (1 vote cast)

    Stainless steel continuous hinge.
    Captive Screw Cover.

    Saginaw Control and Engineering Fiberglass Screw Cover Junction Enclosures are designed for indoor or outdoor use to house electronic controls, instruments and components in areas that may be regularly hosed down, are in very wet conditions, or are exposed to corrosive agents. Provides protection from dust, dirt, oil and water.

    Construction –
    • Fiberglass reinforced compression
    molded polyester.
    • Continuous memory retaining gasket.
    • Mounting strips molded in.
    • Captive screw fasteners.
    • Integral panel mounting inserts.
    • Stainless steel continuous hinge.

    Finish –
    Light gray fiberglass. Optional panels are marine grade aluminum.

    IS5 – Industry Standards –
    NEMA Type 4, 4X 12 & Type 13
    UL Listed Type 4, 4X & 12
    CSA Type 4, 4X & 12
    IEC 60529 IP66

    fiberglass junction screw cover enclosure
  • Fiberglass Junction Enclosures

    VN:F [1.9.22_1171]
    (Click stars to rate)
    Rating: 9.0/10 (1 vote cast)

    Stainless steel continuous hinge.
    Quick release padlock latch.

    Saginaw Control and Engineering Fiberglass Junction Enclosures are designed for indoor or outdoor use to house electrical and electronic controls, instruments and components in areas that may be regularly hosed down, are in very wet conditions, or are exposed to corrosive agents. Provides protection from dust, dirt, oil and water. Provides protection from occasional temporary or prolonged submersion.

    Construction –
    • Fiberglass reinforced compression
    molded polyester.
    • Oil-resistant door gasket.
    • Mounting strip molded in.
    • Quick release padlock latch.
    • Integral panel mounting inserts.
    • Stainless steel continuous hinge.

    Finish –
    Light gray fiberglass. Optional panels are marine grade aluminum.

    IS5 – Industry Standards –
    NEMA Type 4, 4X 12 & Type 13
    UL Listed Type 4, 4X & 12
    CSA Type 4, 4X & 12
    IEC 60529 IP66

    fiberglass junction enclosure
  • Fiberglass Junction Enclosures with Window

    VN:F [1.9.22_1171]
    (Click stars to rate)
    Rating: 9.0/10 (1 vote cast)

    Saginaw Control and Engineering Fiberglass Junction Enclosures with Windows are designed for indoor or outdoor use to house electronic controls, instruments and components in areas that may be regularly hosed down, are in very wet conditions, or are exposed to corrosive agents and require unrestricted viewing of gages or controls. Provides
    protection from dust, dirt, oil and water.

    Construction –
    • Fiberglass reinforced compression
    molded polyester.
    • Continuous memory retaining gasket.
    • Mounting strips molded in.
    • Quick release padlock latch.
    • Integral panel mounting inserts.
    • Stainless steel continuous hinge.
    • UVA acrylic bonded window

    Finish –
    Light gray fiberglass. Optional panels are marine grade aluminum.

    IS5 – Industry Standards –
    NEMA Type 4, 4X 12 & Type 13
    UL Listed Type 4, 4X & 12
    CSA Type 4, 4X & 12
    IEC 60529 IP66

    fiberglass junction enclosure with window
  • Fiberglass Pushbutton Enclosures

    VN:F [1.9.22_1171]
    (Click stars to rate)
    Rating: 9.0/10 (1 vote cast)

    Saginaw Control and Engineering Fiberglass Pushbutton Enclosures are designed for indoor or outdoor use to house pushbuttons, switches, and pilot lights in areas that may be regularly hosed down, are in very wet conditions, or are exposed to corrosive agents. Provides protection from dust, dirt, oil and water.

    Construction –
    • Fiberglass reinforced compression
    molded polyester.
    • Continuous memory retaining gasket.
    • Hole diameter is 1.20” (30.5 mm).

    Finish –
    Light gray fiberglass.
    IS5 – Industry Standards –
    NEMA Type 4, 4X 12 & Type 13
    UL Listed Type 4, 4X & 12
    CSA Type 4, 4X & 12
    IEC 60529 IP 66

    Step 1: Pick your enclosure below
    Step 2: Configure / Customize with Legend Plates, Nameplates, Pilot Lights, Selector Switches, Pushbuttons, ESTOP and Hole Seals

    fiberglass pushbutton enclosure
  • Fiberglass Wall Mount Enclosures

    VN:F [1.9.22_1171]
    (Click stars to rate)
    Rating: 9.0/10 (1 vote cast)

    Saginaw Control and Engineering Fiberglass Wall Mount Enclosures are designed for indoor or outdoor use to house electrical and electronic controls, instruments and components in areas that may be regularly hosed down, are in very wet conditions, or are exposed to corrosive agents. Provides protection from dust, dirt, oil and water.

    Construction –
    • Fiberglass reinforced compression
    molded polyester.
    • Oil-resistant door gasket.
    • Mounting feet molded in.
    • Quick release latches.
    • Padlock hasp and staple.
    • Integral panel mounting inserts.
    • Stainless steel continuous hinge.

    Finish –
    Light gray fiberglass. Optional panels are marine grade aluminum.

    IS5 – Industry Standards –
    NEMA Type 4, 4X 12 & Type 13
    UL Listed Type 4, 4X & 12
    CSA Type 4, 4X & 12
    IEC 60529 IP66

    fiberglass wall mount enclosure
    ↑ Top of Page
    ×
    Quick Quote
    • This field is for validation purposes and should be left unchanged.
    ×
    My Favorites

    < ?php mfp_the_link("add_link=Add item to favorites”);
    ?>
    < ?php mfp_display("Your Favorites”);
    ?>

    ×
    ×